E-Pos 1000 (P4) User Manual download pdf (Page 13)

At the bottom of the menu are the control keys for use on this menu. If you need

any help in each item field, you can press the <F1> key. It will display the relevant

information to help you. The memory display at the lower right-hand side of the

menu is read-only. It will adjust automatically according to the memory changed.

The following describes each item of this menu.

Date

The date format is:

Day : Sun to Sat

Month : 1 to 12

Date : 1 to 31

Year : 1994 to 2079

To set the date, highlight the “Date” field and use the PageUp/ PageDown or +/-

keys to set the current time.

Time

The time format is: Hour : 00 to 23

Minute : 00 to 59

Second : 00 to 59

To set the time, highlight the “Time” field and use the <PgUp>/ <PgDn> or +/-

keys to set the current time.

IDE Primary HDDs / IDE Secondary HDDs

The onboard PCI IDE connectors provide Primary and Secondary channels for

connecting up to four IDE hard disks or other IDE devices. Each channel can

support up to two hard disks; the first is the “Master” and the second is the “Slave” .

Press <Enter> to configure the hard disk. The selections include Auto, Manual, and

None. Select ‘Manual’ to define the drive information manually. You will be asked

to enter the following items.

CYLS : Number of cylinders

HEAD : Number of read/write heads

PRECOMP : Write precompensation

LANDZ : Landing zone

SECTOR : Number of sectors

The Access Mode selections are as follows:

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 61 62

No comments

E-Pos 1000 (P4) User Manual Page 13